1984 Megatron Body Parts
Home

 

 

P-38  PARTS most commonly broken (these parts may not have decals)     1/24/05

File Photo

Group

Index

Number

 Transformer Part Notes            
         
20227e01.jpg (25339 bytes) 845DMEG Megatron Gray Barrel  
11126a34.jpg (34516 bytes) 845DMEG Megatron set of arms w/hinges This set has both arms, fist, hinges, and screws but may need a head/arms pin to attach to your P-38
11126a41.jpg (25331 bytes) 845DMEG Megatron Left arm *
11126a40.jpg (30512 bytes) 845DMEG Megatron Right arm *
20227f1.jpg (24566 bytes) 845DMEG Megatron Arm Hinges 20227f2.jpg (35041 bytes)
20227f3.jpg (5885 bytes) 20227f4.jpg (5928 bytes) 845DMEG Megatron 6X6MMF Holds arms to arm hinges - may be black or chrome

0.222 in. length
20227e03.jpg (11244 bytes) 845DMEG Megatron Left Hand
20227e02.jpg (11856 bytes) 845DMEG Megatron Right Hand
20227e11.jpg (6358 bytes) 845DMEG Megatron 10MMP there are 2 10mm pins used on the P-38 - one to hold the head  and one to hold the arms hinges.  (0.395)
11126a35.jpg (22011 bytes) 845DMEG Megatron head w/ 3 screws *
20227e05.jpg (18150 bytes) 845DMEG Megatron Face Watch for paint wear
20227e06.jpg (22899 bytes) 845DMEG Megatron Left head half 20227e07.jpg (19683 bytes)
20227e08.jpg (21142 bytes) 845DMEG Megatron Right head half 20227e09.jpg (27777 bytes)
20227e10.jpg (7216 bytes) 845DMEG Megatron 7MMS Takes 3 - 7MMS to form head - these screws are more fine threaded than the other 7mm screws
845DMEG Megatron Scope Mount w/ screw *
20227f6.jpg (34537 bytes) 845DMEG Megatron Slide Housing *
20227f8.jpg (27353 bytes) 845DMEG Megatron Slide Internals *
20227f9.jpg (5380 bytes) 845DMEG Megatron 7MMS 2 - 7mm screws hold the Internals to the slide housing
3011701_5.jpg (17019 bytes) 845DMEG Megatron Slide Bottom Commonly broken part - the one in this photo is broken , too

845DMEG Megatron Slide Bottom screw .118 X .0206 Holds gray barrel to slide bottom
11126a37.jpg (15187 bytes) 845DMEG Megatron Left Receiver half and hinge *
20227c4.jpg (40082 bytes) 845DMEG Megatron Left Receiver half shell 20227a02.jpg (49862 bytes)
20227d02.jpg (13413 bytes) 845DMEG Megatron 5X5MMF

Holds slide bottom to receiver - 1 per unit - 5mm x 5mm

.206 in
11126a38.jpg (16505 bytes) 845DMEG Megatron Right Receiver half and hinge *
20227c1.jpg (38711 bytes) 845DMEG Megatron Right Receiver half shell 20227c2.jpg (41479 bytes)
11126a39.jpg (12765 bytes) 845DMEG MEGATRON Trigger Fits inside receiver
20227c6.jpg (16489 bytes) 845DMEG Megatron Trigger return spring Fits inside receiver
20227b1.jpg (10647 bytes) 845DMEG Megatron Clicker Noise maker  for trigger
20227a03.jpg (10313 bytes) 845DMEG Megatron 7MMS Receiver assembly is held together by 4 of these
20227a12.jpg (38532 bytes) 845DMEG Megatron Left Leg Hinge unit 3-piece unit comes with 4 - 5MMS Screws
20227d01.jpg (35010 bytes) 845DMEG Megatron Right Leg Hinge unit
20227a10.jpg (5497 bytes) 845DMEG Megatron 5MMS 5mm screws used in leg hinge units
20227b2.jpg (9186 bytes) 845DMEG Megatron 12MMP  12mm pin used to attach leg hinge to leg.
20227d07.jpg (7011 bytes) 845DMEG Megatron 6X5MMF 6x5mm screw used to hold the leg to the leg hinge

0.234 in length
20227d08.jpg (6321 bytes) 845DMEG Megatron 5MMLR 5mm lock-ring washer use on above screw
20227d09.jpg (60179 bytes) 845DMEG Megatron Leg Leg with all 9mm screws
20227d10.jpg (47678 bytes) 845DMEG Megatron Right leg with all 9mm screws
20227d11.jpg (7382 bytes) 845DMEG Megatron 9MM 9mm screw - each leg uses 5
20227d05.jpg (51804 bytes) 845DMEG Megatron Left and right legs shown with hinges  20227d04.jpg (57638 bytes)